NEWS CENTER
NEWS CENTER
Position:
Homepage
-
-
-
Luoyang Pengfei Company fully has the science and innovation board listing standards

Luoyang Pengfei Company fully has the science and innovation board listing standards

  • Categories:Company news
  • Author:
  • Origin:
  • Time of issue:2021-02-05
  • Views:0

(Summary description)"Luoyang Pengfei Wear-Resistant Materials Co., Ltd." is a national high-tech private enterprise.

Luoyang Pengfei Company fully has the science and innovation board listing standards

(Summary description)"Luoyang Pengfei Wear-Resistant Materials Co., Ltd." is a national high-tech private enterprise.

  • Categories:Company news
  • Author:
  • Origin:
  • Time of issue:2021-02-05
  • Views:0
Information

  A well-known securities firm with the qualification to be listed on the Science and Technology Innovation Board in the country,

  "Luoyang Pengfei Wear-Resistant Materials Co., Ltd." is a national high-tech private enterprise. It was restructured in 2014 by shareholding. The first batch of NEEQ was listed in October 2015. In December 2017, there was no transfer mechanism for NEEQ. The listing on the ChiNext Board withdrew the listing on the NEEQ, and plans to apply for listing on the Science and Technology Innovation Board in 2019. In October 2013, in order to further develop and support the poverty alleviation of Ruyang impoverished counties, our company was relocated from the old factory (North of Maoguo Village, Baima Temple, Luoyang City) to the industrial cluster of Ruyang County by attracting investment. Invested 150 million yuan to start the construction of the factory, covering an area of ​​102 acres and a construction area of ​​45,000 square meters; it was completed and put into production in March 2015, and was listed on the NEEQ in October 2015, becoming the only high-tech NEEQ listed company in a poor county in Ruyang County . From 2015 to 2017, it paid more than 36 million yuan in various taxes to the impoverished Ruyang counties, and arranged more than 300 impoverished laborers in the impoverished counties. At the same time, it invested more than 400,000 yuan for more than 500 major poor households in Neibu Township and Da'an Township of Ruyang County to help poverty alleviation, and made due contributions to the economic revitalization of the poor in Ruyang County. Since 2013, our company has been awarded as "Henan Provincial Government High-tech Enterprise", "Henan Provincial Key Protected Technology Enterprise", "Luoyang Municipal Government Key Protected Technology Enterprise", and "Luoyang Municipal Government Awarded Key Intellectual Property Protection Enterprise" ". China Building Materials Industry Association and China Cement Association awarded outstanding contributions to independent innovation of wear-resistant ceramic materials, and won 18 national invention patents and 46 new patents. Won the “Independent Innovation Award” for high-tech wear-resistant ceramic materials in the national building materials industry, the “First Prize” of high-tech ceramic wear-resistant materials in the building materials industry, the “Non-metallic Refractory Materials Award”, and the “Special Gold Award” at the International Patent and New Technology Expo, becoming the building materials industry Advanced honorable titles such as excellent supplier enterprises. Become a famous brand product at home and abroad, and the product market is in short supply.

  The high-tech products successfully invented and developed by our company's independent innovation are all in line with the positioning of the science and technology innovation board. First, they are in line with the world's leading edge of science and technology, filling the gaps at home and abroad; second, facing the main economic battlefield, they are the high-tech industries urgently needed by the domestic and foreign large markets. Energy-saving and consumption-reducing products; thirdly, facing the major national needs, because the high-tech innovation progress in the building materials industry is a major national demand; fourthly, priority support is in line with the national strategy, and our company's high-tech products are in line with the national innovation strategy; fifth, having the key The core technology, our company successfully invented and developed the "nano ceramic preheater inner cylinder", "nano ceramic wear-resistant coating", "high crystal ceramic ball", "high crystal ceramic liner", "cast steel ceramic composite liner and All of the "grindstone" is the core technology that won the national invention patent, filling the gap at home and abroad. The market has a wide range of applications, all of which are energy-saving and consumption-reducing products. Sixth, our company has outstanding technological innovation capabilities. Our company not only has a core innovation team, but also cooperated with "Zhengzhou University", "Henan University of Science and Technology" and "Luoyang Institute of Technology" in 2015. "In our company, we jointly established the "High-tech Materials Research Institute", which has a strong scientific and technological innovation team foundation. The above-mentioned high-tech products successfully invented and developed by our company fill the gaps at home and abroad. The major products in the market are energy saving and consumption reduction, which are all welcomed and praised by users at home and abroad. Seventh, we mainly rely on core technology to develop production and operation. All production and operation of our company rely on the production and operation of high-tech patented products successfully developed by independent innovation and invention; Eighth, with a stable business model, the high-tech products successfully invented and developed by our company have occupied domestic and foreign markets, and have grown steadily, and the market is in short supply. Ninth, the market has a high degree of recognition, and our company's high-tech products are received by domestic and foreign market users. Highly recognized and welcomed; tenth, it has a good social image, which generates great social benefits for the country, and is a company with strong growth. The high-tech products invented and developed by our company are not only welcomed by users at home and abroad, but also won the "Special Contribution Award", "First Prize", "Non-metal Refractory Award", "Independent Innovation Award", and Building Materials Industry Award Honorable titles such as "Excellent Supplier". Our company plans to expand the scale of production within five years to achieve an industrial output value of 1 billion yuan and a net profit of 200 million yuan after tax by 2023. The annual profit of output value has increased by more than 50%, which is fully in line with the conditions for listing on the Science and Technology Innovation Board. It is not only a high-growth enterprise, but also a leapfrog high-tech enterprise. The market prospects are very impressive, which is fully in line with the national industrial policy.

  我公司自主创新发明研制成功的“纳米陶瓷预热器内筒”荣获国家发明专利“河南省科技发明成果奖”,填补国内外空白。解决了国内外干法水泥生产线普通采用不锈钢金属内筒,因金属内筒在高温1200度左右强风冲击下易腐蚀、易变形、使用不到一年即脱落、堵塞下料口的严重问题。我公司发明研制成功的“纳米陶瓷预热器内筒”由于纳米陶瓷材料制成,解决了金属内筒在高温强风冲击下易腐蚀、易变形、易脱落的难题,提高使用寿命3倍达到三年以上,为用户三年节约成本投入提高生产工艺效率,受到水泥行业欢迎和好评。目前我公司发明研制成功的“纳米陶瓷预热器内筒”已在国内外干法水泥生产线全面推广使用,已在香港华瑞水泥集团、台湾亚东水泥集团、德国越堡水泥、法国拉法基水泥、河南天瑞水泥、湖北华新水泥、山东山水水泥、中建材、中联材、南方水泥、西南水泥、福建海螺水泥、吉林亚泰水泥、福建塔牌水泥,出口到越南水泥、埃及水泥、泰国水泥、土耳其水泥等国内外大型水泥集团推广使用。受到国内外用户好评,为水泥行业节能降耗、提高工艺技术、增加经济效益作出极大贡献。

  一、市场分析

  1、国内市场分析

  目前国内干法水泥生产线1800多条,一般每条生产线高炉需五级纳米陶瓷内筒5套,部分干法水泥生产线是双级双5套,需用陶瓷内筒可达1万套左右,按平均3年更换一次2套计算,大约每年国内干法水泥生产线需陶瓷内筒3600套左右。目前我公司年生产能力仅有300套,仅占国内需求量的1/12不到,根据市场需求5年内我公司陶瓷内筒都处在供不应求,必须大力扩建内筒生产线方能满足市场需求。

  2、国际市场分析

  目前我公司发明研制成功的“纳米陶瓷预热器内筒”是国内外一项空白项目,主要市场是发展中国家。如东南亚、南非、中东、印度、埃及、印尼、土耳其、俄罗斯等国家,预计国际市场干法水泥生产线3600条,一般都是五级5套,部分为双级10套,预计需陶瓷内筒在2万套左右。按三年更换一次大约国外市场每年需陶瓷内筒7200套,市场之大前景非常可观。

  二、纳米陶瓷预热器内筒经济分析

  1、“纳米陶瓷内筒”主要采用纳米陶瓷材料制成,由于陶瓷内筒采用空心挂条挤压制成,比金属内筒每个内筒比重轻四分之三。如金属挂板内筒每套需8吨,纳米陶瓷内筒空心挂条每个内筒仅需2吨;金属内筒每吨大约5万元,平均每个内筒40万元,而陶瓷空心挂条内筒每吨20万元,2吨合计40万元。但陶瓷空心挂条内筒使用寿命是三年,而金属内筒使用一年不到。金属内筒三年更换3个内筒大约120万元,而陶瓷空心挂条内筒仍是40万元,三年仅使用1套,为用户节约金属内筒成本投入80万元。国内干法水泥生产线按1800条计算,每年为国家大约节约成本投入14.4亿元以上,社会效益非常明显。

  2、我公司发明研制成功的“纳米陶瓷内筒”平均按每套40万元计算,大约生产、销售、施工、税收成本按70%计算,仅需成本投入28万元,每套可实现纯利润12万元。目前我公司每年生产陶瓷内筒300套计算,可实现产值1.2亿元,税后纯利润3600万元,可为国家上交各种税收1200万元以上,为国家节约金属内筒成本投入2.4亿元。

  三、我公司五年规划扩大生产纳米陶瓷内筒,按每年扩大生产能力50%计算。计划2019年为300套,2020年扩大为450套,2021年扩大为670套,2022年扩大为1000套,2023年扩大为1500套的生产能力仅占国内市场三分之一不到,仅占国际市场六分之一不到。按照国内外市场需求,我公司陶瓷内筒计划到2023年可实现工业销售产值6亿元,实现税后纯利润1.8亿元,可上交各种税收6000万元,为国家节约金属成本投入12亿元以上。

  四、目前我公司自主创新发明研制成功的“纳米陶瓷预热器内筒”荣获国家发明专利,但由于国内外市场需求极大、附加值极高,难免国内外个别厂家防造。由于我公司发明研制成功的“纳米陶瓷预热器内筒”从原料选择和生产工艺、烧结工艺、施工工艺极为严谨复杂,既是有个别厂家防造,很难切实达到内筒各种严谨工艺要求。既是防造了外观形象但很难达到用户使用要求,加上设备投入很大一般厂家很难很快达到内筒质量和工艺标准,没有三年用户试用很难占领市场。据了解确实有个别厂家防造但都已失败告终,既是通过关系勉强使用,但很难达到我公司质量标准。所以在五年内我公司陶瓷内筒产品质量标准稳定,并且由于是国内外用户认可的名牌产品,仍会保持供不应求局面。另外,国际市场是空白需求极大,在10年内仍处在极大需求局面,所以前景非常可观。

  五、我公司发展战略目标是:依靠科技不断自主创新发明创造,不断研究第二代、第三代产品投放市场,永远保持在高新技术发明创造的前沿。

  六、目前我公司发明研制成功的“纳米陶瓷耐磨涂料”荣获国家发明专利,已在国内外水泥行业输送管道批量推广使用,使用寿命已达3年以上。替代了国内外普遍采用浇注料使用不到一年即脱落难题,受到用户欢迎和好评。但由于生产工艺简单,确实有个别厂家防造,由于他们采用偷工减料方式防造,不思考质量标准,因价格很低廉在市场竞争中扰乱了市场执序,造成市场竞争混乱质量下降局面。我公司在这种情况下发明研制成功更高质量耐磨涂料,不但提高涂料质量同时大大降低了成本。我公司最新研制出的“纳米陶瓷耐磨涂料”不但质量更高、价格最低的高新耐磨涂料,赢得了用户的信任,目前我公司涂料产品仍为名牌产品受到用户欢迎。目前国内水泥企业如香港华瑞、天瑞、华新、山水、亚东、亚泰、法国拉法基、德国越堡仍以我公司专利产品为主,我公司计划2019年投放国内外市场大约2000吨以上,每吨按9000元计算(原来1.5万元/吨)可实现工业产值2000万元左右(仍实现纯利润20%以上)。并且已出口越南、泰国、埃及、土耳其等国家,受到用户欢迎。我公司计划每年增加生产量50%以上,预计到2023年可实现销售一万吨以上,实现工业产值一亿元以上。

  七、我公司自主创新发明研制成功的“高晶陶瓷球”和“陶瓷衬板”已进入市场推广。由于陶瓷球、陶瓷衬板比钢球、铸造衬板轻三分之一,为水泥行业球磨机球磨每吨水泥可节约用电费5元左右。此一高新产品已在洛阳中联水泥试用成功,不但解决了球磨机球磨料粉节约用电,而且由于“高晶陶瓷球”和“高晶陶瓷衬板”在球磨水泥料粉质量比国内外普遍采用钢球和球磨机铸钢衬板球磨减少了铁含量,提高了水泥质量受到用户欢迎和好评。预计国内水泥生产线1800条,每条生产线需球磨机2-3台,每台球磨机需陶瓷球、陶瓷衬板200吨左右。全国1800条生产线大约球磨机为3600台,每台需陶瓷球、陶瓷衬板200吨,需72万吨,目前我公司生产能力4000吨,仅占国内需求1.7%不到。目前正在国内外推广使用,如台湾亚东、中联材、香港华瑞、湖北华新、德国越堡、法国拉法基等已进入批量使用。国外越南、泰国、埃及水泥企业已到我国参观水泥行业使用情况,准备推广采用。预计2019年投放国内外市场为4000吨,每吨按一万元计算可实现工业产值4000万元以上。以上四种产品生产销售预计2019年我公司可实现工业产值1.8亿元,实现纯利润5000万元左右,比2018年产值利润翻两番。

  八、我公司自主创新发明研制成功的铸钢陶瓷复合铸造浇注的“复合衬板磨盘”,由于金属陶瓷复合磨盘比铸钢磨盘提高使用寿命10倍以上。比国内中信重机生产制造的铸钢磨盘质量提高使用寿命10倍以上。目前我公司整体磨盘还未推向市场试用就有很多厂家预定购,我公司计划2019年先试生产2-3台推向市场试用。每台磨盘400万元左右,计划2020年生产出合格磨盘20台,可实现工业产值8000万元以上。目前国内水泥生产线1800条,每条生产线需磨盘2-3台,计算需求3600台,我公司计划在五年内能达到年生产磨盘100台,生产能力仅占国内需求量的三十六分之一。根据市场需求扩大生产能力,我公司“铸钢陶瓷复合衬板”已受到军工行业高度评价。目前公司正在进入军工办理手续,如进入军工将为国防建设作出应有贡献来。

  Our company is a private joint-stock company. Before 2013, because it was mainly based on refractory materials, due to fierce market competition, our company decided to turn to the research and development of high-tech ceramic wear-resistant materials. In order to support poverty alleviation in poverty-stricken counties, in October 2013, it invested in the construction of factories in the industrial agglomeration area of ​​Ruyang impoverished counties, which was completed and put into operation in early 2015. Since 2016 to 2018, our company was originally an environmentally-compliant enterprise, and because it was listed as a refractory and ceramic industry, it was forced to limit production and stop production, restricting development. After the Party Central Committee General Secretary Xi Jinping held a private enterprise symposium in 2018, we vigorously supported the development of private enterprises, and our company won development opportunities. In accordance with the huge market demand for high-tech products successfully developed by our company’s independent innovations, our company has formulated a five-year development plan to increase the after-tax profit of industrial output value by 50% every year, and fully develop after the sci-tech innovation board at the end of 2019. grow. It is planned to develop into an industrial output value of 1 billion yuan in 2023 and achieve a minimum net profit of 200 million yuan. Our company will become a larger production base integrating the research and development, production and sales of high-tech wear-resistant ceramics at home and abroad, which will provide the economy of Ruyang impoverished counties. Rejuvenation makes due contributions. It is hoped that securities firms with the qualifications to be listed on the Science and Technology Innovation Board will give priority to cooperating with our company to list on the Science and Technology Innovation Board, which will bring substantial benefits to customers who invest in buying shares.

Scan the QR code to read on your phone

Recommended information

Luoyang

Luoyang Pengfei Company fully has the science and innovation board listing standards

"Luoyang Pengfei Wear-Resistant Materials Co., Ltd." is a national high-tech private enterprise.
2021-02-05
High-tech

High-tech enterprises are constantly innovating and developing

Luoyang Pengfei Wear-resistant Materials Co., Ltd. ("Luoyang Pengfei" for short) is constantly innovating, developing and growing.
2021-02-05
Pengfei

Pengfei company has always relied on scientific and technological innovation to develop and grow

Luoyang Pengfei Wear-Resistant Materials Co., Ltd. has always insisted on relying on scientific and technological innovation to develop and grow.
2021-02-05
Luoyang

Luoyang pengfei wear-resistant materials co., LTD. Relying on independent innovation of science and technology, continues to grow and become Henan high-tech wear-resistant materials engineering research center

Luoyang Pengfei Wear-resistant Materials Co., Ltd. (referred to as "Luoyang Pengfei Company"), invested and built a factory in the north of Maoguo Village, Baima Temple, Luolong District, Luoyang City in 1979, covering an area of ​​43.6 acres, relying on scientific and technological hard work to develop and innovate.
2021-02-05

Luoyang Pengfei Wear-resistant Materials Co., Ltd.

er

TEL:

400-6037995

EMAIL:lypf0379@126.com

ADD:No. 1, Pengfei Road, Industrial Cluster Area, Ruyang County, Luoyang, China

 

© 2021 Luoyang Pengfei Wear-resistant Materials Co., Ltd.     豫ICP备16007321号-1     www.300.cn